Changing the Chain on a Sears Craftsman Electric Chainsaw
- Unplug the electric chainsaw's electrical connection from the power source.
- Loosen the cutting chain sprocket cover knob by hand; turn the knob counter-clockwise to loosen.
- Loosen the cutting chain tension; turn the tension ring counter-clockwise until the tension ring stops.
How do you maintain an electric chainsaw? Before putting away your chain saw for the winter, it's a good idea to winterize it for storage. Drain chain oil and remove the chain and bar. Soak and clean the bar and chain, dry them, then apply a thin layer of oil to help preserve them and prevent rusting.
which way does the chain go on a chainsaw?A chainsaw always rotates its chain clockwise. No matter what the best chainsaw model is, it's always the same. That's why the sharp edges of the blade should face the clockwise direction. While watching from the top, you should notice the sharp edges facing in the opposite direction of the chainsaw body or motor.
How do you tighten the chain on a chainsaw? There is a tension screw located near the base of the bar on the chainsaw. To tighten the chain, turn it clockwise, and to loosen turn it counterclockwise. Don't over-tighten the chain as this could cause it to break. The video below from Echo demonstrates the proper way to adjust a chain tension.
how do you sharpen a chainsaw blade?
Use the depth gauge tool and file to adjust the height of the depth gauges on the chain. If the depth gauges are too high, the cutters can't reach the wood. Re-sharpen your chain every time you refill your chainsaw with fuel. Keep your chain out of the dirt when cutting or it will dull quickly.
When should a chainsaw chain be replaced? When to Replace a Chainsaw Chain Teeth are broken or worn unevenly. Issues with Chain Tension. Smoke is present when cutting. Sawdust, rather than coarse chips are left behind. Chainsaw feels unbalanced, cuts unevenly, or rattles when in use.
who makes Craftsman chainsaw?
This is because today, most of the chainsaws sold by Sears, like the Craftsman chainsaws are now being produced by the Husqvarna Industries. This is with the exception of products that have the “Incredi - Pull” feature because they are not made by Husqvarna. They are however, made by MTD.
Why does chainsaw chain keep coming off? The main reason the chain jumped off in the first place is usually too loose chain tension. When you put the chain back on make sure it is the correct direction and also adjust the tightness with the adjustment screw and then tighten the two bolts real tight. The chain should pull away slightly from the bar
Is it possible to put a chainsaw blade on backwards?
Unfortunately the chain will go on either way, but if you put it on backwards, it will not cut. Remember, when holding the chainsaw, the cutting portion of the blade should be facing away from you, traveling from the back of the chainsaw to the front tip of the chainsaw.
Why is my electric chainsaw not cutting? Reason One: The most common cause of a chainsaw that won't cut properly is a dull cutting chain. Try sharpening or replacing the chain. If the chain is too tight, the chain may not rotate at the proper speed, causing the chain not to cut properly.
How tight should a chainsaw chain be?
A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can't pull the drive links out of the bar nose.
You May Like Also