How Do You Light The Pilot On A Mertik Maxitrol?

Use a flashlight to look into the tube where the pilot flame comes out. Use a can of compressed air to blow the dust and dirt off of the end of the innermost tube. Turn the gas valve back on and attempt to light the pilot.

How do you light a Mertik Maxitrol?

Depress the Main control knob and turn counterclockwise to the ING position. Depress the knob fully and turn counterclockwise to the pilot position. The igniter will spark while turning the knob (repeat until pilot is lit). Jan 14, 2020

How do I turn on the pilot light in my gas fireplace?

Turn the knob from the “Off” to the “Pilot” position. Push in the pilot knob, which manually sends gas into the system. Push the igniter button once every second until it lights. Depending on how long it's been since the gas fireplace was last used, ignition may take multiple attempts.

How do you light a pilot light on a gas fireplace without ignitor?

Flame-Lit Pilot Light Light a match or butane candle lighter and hold it near the burner in the fireplace. Turn the gas key to release gas to the burner. Pull the match or light away when the burner lights. You can adjust the flame height by turning the gas key. Oct 15, 2015

How do you light the pilot on a propane log?

Press the fireplace safety pilot control knob down and hold it as you turn it over to the pilot position. Continue to hold the knob down for five seconds to give the propane enough time to flow through the hose that connects the propane gas line to the fireplace.

How do you light a Valor plus fireplace?

Turning the fireplace ON When using your remote control, hold down the OFF and large flame buttons simultaneously. Once you hear the beep to start the activation sequence, the buttons on the remote can be released. Once the pilot light ignites, the flames will turn to full fire and remain in "Manual Mode".

Should the pilot light always be on in a gas fireplace?

Leaving the gas on keeps this compound moving out of the tubes. Keeping the pilot light on will also keep moisture out of the unit and in turn, help prevent corrosion. ... As you can see, it's probably best in most cases to extinguish the pilot light in your gas fireplace during the months when you don't need heat.

Does gas turn off when pilot goes out?

The pilot light is a small gas flame that stays lit all the time. ... When the thermocouple senses a lit pilot, it leaves the main gas valve open. If the pilot light is out, or isn't burning hot enough, it closes the valve, cutting off gas flow so it won't build up inside your house. Aug 23, 2018

What do you do when the pilot light goes out on your fireplace?

How to Relight a Pilot Light Turn off your appliance at the power switch or thermostat. Find the gas valve control knob and turn it to select “pilot.” If pilot light controls are sticky, do not apply force or use oil. ... Press the red button while simultaneously holding a match to the pilot burner. More items... • Oct 5, 2015

Why won't my pilot light light on my gas fireplace?

If gas is coming out of the pilot, but it still won't light, the spark igniter could be the problem. Alleyne says to look for and clear out any debris between the igniter and thermocouple. 4. The pilot lighting, but not staying lit, indicates that the thermocouple is worn out, Worthen says. Nov 7, 2014

What is a standing pilot light?

The standing pilot light is the traditional ignition source for most natural gas-fueled combustion heating systems. It is comprised of a small burner, a gas valve to supply the burner, and a thermocouple. When the flame goes out, the current stops and the gas valve closes. ... Dec 5, 2014

Can I start my gas fireplace without electricity?

If you have a gas fireplace or stove with a standing pilot, it will light during a power outage since it doesn't require electricity to activate the pilot flame.

Should I turn off pilot light in summer?

If you have a furnace that uses a pilot light to ignite the burners, the pilot light will waste energy during the summer. You don't need your furnace to turn on suddenly, so there's no reason to keep the pilot light burning gas all this time. ... (Cutting off the gas to the furnace is also a good safety precaution.) Apr 29, 2019

How much propane does a fireplace pilot light burn?

If your fireplace uses a pilot light for ignition, that flame will consume about 600 BTU per hour or 14,400 BTU per day, which equates to about a gallon of propane or about 4 pounds of propane every six days.

How do you manually light a propane fireplace?

Press the fireplace safety pilot control knob down and hold it as you turn it over to the pilot position. Continue to hold the knob down for five seconds to give the propane enough time to flow through the hose that connects the propane gas line to the fireplace.

How do I turn the gas off to my fireplace?

0:28 1:15 Suggested clip 30 seconds How to Shut Off Gas Fireplace with Standing Pilot - YouTube YouTube Start of suggested clip End of suggested clip

How do you turn off a gas fireplace without the remote?

Usually there is a rocker switch that is located around your burner which, if in the "ON" position, it will override the remote. Turn the switch to "OFF." There may be a wall switch that allows you to turn your burner on. Turn the switch to "OFF." A slide switch on the receiver has been moved to the "ON" position.

Why is my valor fireplace beeping?

Before you change the batteries, turn the fireplace and pilot off and let it cool. When three seconds of rapid fire beeps sound, it's time to replace your receiver batteries. Locate the battery holder under the firebox near the controls.

How do I reset my Mertik Maxitrol?

A code is selected automatically for all Mertik Maxitrol electronics from among 65,000 random codes available. The receiver has to learn the code of the handset: Press and hold the receiver's reset button (see figure 22) until you hear two (2) beeps. The first beep is short and the second beep is long.

Is it OK to leave gas fireplace on overnight?

We'd never recommend leaving any fire burning overnight, regardless of what type it is. The main problem with leaving a gas fire on at night is the threat of carbon monoxide poisoning, so it's best just to switch off to be safe. ... Gas Fireplaces Also, there is no danger of burning logs, sparks, embers, or smoke. Feb 14, 2020

How much does it cost to run a gas fireplace per hour?

For the equivalent in a gas insert or gas fireplace, a large could use about 40,000 BTU/hour and in this case would cost about $0.40/hour to operate for natural gas and about $1.31/hour for propane. Jan 10, 2015

Are pilot lights always on?

The pilot light can be a “steady-on” pilot, or an 'intermittent” or an electronic ignition system. The later type of pilot light is only on when the valve is open and the fireplace is operating. A millivolt valve utilizes a pilot light that is always lit. Mar 19, 2020

Can I relight the pilot light by myself?

Pilot lights were once standard on all gas furnaces, but newer systems don't always contain pilot light ignition systems. Instead, some newer furnaces use electronic ignition systems. ... Often, homeowners can relight the pilot themselves. Mar 2, 2017

Is it dangerous to relight a pilot light?

A pilot light may need to be re-lit from time to time after being extinguished on purpose or by accident. If it is accidentally extinguished, there exists a danger that the gas used to keep the flame lit will continue to vent, possibly into the living space. Aug 2, 2016

Can you get carbon monoxide poisoning from a pilot light?

Carbon monoxide is only produced when fuel of any type; oil, gas, wood or coal is burned. ... And a pilot light out of adjustment can produce carbon monoxide gas. The amount produced by even a badly maladjusted pilot is small because the flame size is also small. Oct 2, 2007

Does the gas company light pilot lights?

Most of today's gas appliances have electric starters, rather than pilot lights. ... One caveat, however: If you detect the strong smell of natural gas, do not attempt to light the pilot. Instead, leave the house and call your local gas company or 911.

When did furnaces stop using pilot lights?

Newer gas furnaces (since about 2010) do not have a traditional pilot light that burns all the time. Instead they use electronic ignition systems that light only as needed. Constant flame or “standing pilot” heating systems are still fairly common in older homes, and they can still be repaired in most cases. Oct 29, 2019

Can you get carbon monoxide poisoning from a gas fireplace?

Yes, gas fireplaces are one potential cause of carbon monoxide poisoning. While there are many potential sources of such exposure, including certain appliances and devices, motor vehicles and wood stoves, gas fireplaces are a common culprit. Nov 24, 2020

How do you know if you have a bad thermocouple?

If you can't get the flame to light at all, and you're sure the gas is on, there's probably an obstruction in the pilot tube. If the flame lights and goes out when you release the gas control knob after holding it in for the recommended 20 to 30 seconds, that's the sign of a thermocouple malfunction. Sep 25, 2019

What do you do when your gas fireplace won't start?

Check your breaker box and reset any tripped breakers you come across. Gas Valves: Make sure that your gas valve is open and in the on position to ensure the flow of gas to your fireplace. This should be located in the firebox.

How do I know if my gas fireplace is working?

A properly operating gas fireplace will have a safe and secure glass enclosure, will ignite without delay, have a clean blueish color flame and will vent properly out through a termination cap that is clear from debris or obstruction. Jan 5, 2017

How do you light a standing pilot?

Place the lit match or ignited lighter tip at the pilot while depressing and holding the reset button or depressing the knob, as appropriate. Depress the button or knob for about 30 seconds. This maintains gas flow to the pilot until the thermocouple gets hot enough to open the main gas valve. Oct 5, 2020

How does a standing pilot work?

In such furnaces, the standing pilot works together as a team with the thermocouple (the electronic device that senses if the pilot flame is hot enough to ignite natural gas or propane fuel to the burner) to control gas flow and the ignition of your furnace's burners. Nov 23, 2020

How do you relight an automatic pilot light?

How to Relight an Automatic Pilot Light Set the thermostat on your furnace to its lowest setting. ... Remove the access panel covering the gas control knob. ... Turn the gas control knob to the OFF position. ... Turn the gas control knob or knobs to the ON position. ... Turn the electrical power to the furnace back on.

How long can you run a gas fireplace?

Whereas, gas fireplaces that have easily opened doors on the front and are vent-free, should only be operated for two to three hours at a time.

How do I start a Heat and Glo fireplace without electricity?

For hearth products using a wireless remote or wall switch, you can operate your product by accessing the control box in the controls below your fireplace or behind your stove. By switching the hearth product to 'ON', rather than 'OFF' or 'REMOTE', your fireplace or stove will operate normally without power.

Is it OK to turn off pilot light?

Turning off the pilot lights on gas fireplaces and furnaces when not in regular use can save energy and money. ... Your furnace only uses a small amount of gas to power the pilot light. Turning the pilot light off, only saves a few dollars each month. If you don't mind spending a few cents a day, don't mess with it. Apr 26, 2018

Can you leave pilot light on?

If the pilot is left on for long stretches of time, without actually turning on the main burner of the fireplace, a white film can develop on the inside of the glass. This is sulfur based film and if left uncleaned could possibly etch itself into the glass. Jun 8, 2013

How much does a pilot light cost per month?

The pilot light burns significantly less fuel than a fire but it can cost $8 to $10 a month if your fireplace is fueled by natural gas. If your fireplace is fueled by propane, it could cost up to $20 a month. Turning off the pilot would reduce your energy costs during the summer.

Is it cheaper to run your gas fireplace or furnace?

Zone Heating with Gas Fireplaces Operating a furnace for one hour at 75,000 -100,000 Btu cost a homeowner $1.12 - $1.49 based on last month's national average natural gas rate. By comparison, a natural gas fireplace running at 30,000 Btu per hour cost only 45 cents.

How much does it cost to run a natural gas pilot light?

A pilot light is a small flame that is kept lit to provide a catalyst for the main burner to be turned on when needed. The average fuel consumption of your standing Pilot light is: Natural gas is $0.60 a day = $219 a year. Liquid Propane is $1.80 a day = $657 a year. Oct 13, 2017

Can you light a propane fireplace without electricity?

It requires an electric source to create a spark that ignites the pilot light. If the power is out, the fireplace will not ignite. Aug 1, 2019

Why is my propane fireplace not working?

Step 1 – Check the main valve to make sure the gas is turned on. Step 2 – If the gas is on, and the pilot hasn't been lit in several months, try purging the air out of the pilot tubing, To do this, hold the pilot button down for about two minutes while the air bleeds out.

How do you purge a propane fireplace?

While pressing the valve control knob in, press the igniter button repeatedly until the pilot ignites. This could take anywhere from one to 10 minutes to bleed air out of the lines as the gas starts to flow. Once the pilot is lit, continue to press the valve knob inward for 30 seconds before releasing it. May 16, 2018

Should gas fireplace be turned off in summer?

Your Utility Bill Perhaps the most important reason to turn off gas fireplace pilot light in summer is because of the money and energy you will be saving. If you leave the pilot light on during the summer it is simply sitting there burning gas, which is wasting gas and contributing to an exorbitant energy bill. Jul 16, 2018

Where is the gas valve for my fireplace?

Gas fireplace: The shut-off for a gas fireplace is typically on the control panel. This control panel can be found behind the front screen, where a knob that controls the flow of gas can be turned to 'off'.

Why is my gas fireplace turning on and off?

Often a gas fireplace has a millivolt generator which is in the path of the pilot flame. It is about the size of an AA battery and is wired to the switch and gas valve. If the millivolt generator is old and weak, or if the pilot flame is weak and wavering, the main burner will go on and off.

Can you add a remote to any gas fireplace?

Yes, you can add a remote to your gas log set after it's been installed and the log set is already equipped with a millivolt valve.

How do you turn on an electric fireplace without the remote?

Electric fireplaces typically have separate switches for the heating and flame elements, allowing you to use them separately, or both at the same time. To get the flames to work on an electric fireplace, simply turn on the flame effect switch. Nov 18, 2019

How do remote control gas fires work?

Remote control gas fires work with the use of a battery operated or mains connected control valve, which responds to your battery powered remote control. You don't have to use the remote control to operate some fires – they also come with standard controls on the appliance itself. Mar 17, 2020

You May Like Also

  • ⯃ Are eggs inflammatory or anti inflammatory?
  • ⯃ What is the direction of the electric field at the center of the square due to the four corner charges?
  • ⯑ What is the cheapest iPhone X?
  • ⯑ What does a vet tech do at a zoo?
  • ⯃ How do I choose a faucet finish?
  • ◉ How old is Julia Sweeney?
  • ⬗ How much are the wristbands at the Sonoma County Fair?
  • ◎ How much is a bundle of 2x4s?
  • ⣿ What is a good score on the ATI TEAS test?
  • ◐ Are Buckeyes the same as chestnuts?
  • How do you light the pilot on a GE xl44 oven?
  • Does Nordstrom hem for free?
  • What should a guest wear to a quinceanera party?
  • What did a gallon of milk cost in 2000?
  • How do you make a floating lantern?
  • How long does it take to sew a teddy bear?
  • What is there to see between Boston and Portland Maine?
  • How long does it take to grow a lotus flower?
  • What are Euclid’s first three postulates?
  • What is brittle diabetes?
  • What can you do with overripe tangerines?
  • What is the primary purpose of a lockup agreement?
  • How do nurses handle conflict?
  • Is Indiana a common law state?
  • How much does it cost to build a new house in California?
  • Is an egg in vinegar hypotonic or hypertonic?
  • How big do Annabelle hydrangeas get?
  • Where are the eggs of the spring peeper?
  • How do you grow beets from seed outside?
  • What is the use of Lingzhi coffee?
  • Are trumpet vines poisonous to dogs?
  • How many hours was Aretha Franklin’s funeral service?
  • What is the difference between merit pay and bonus?
  • Can you put a double socket on a spur?
  • What causes a pyroclastic surge?
  • Does whole wheat cause weight gain?
  • Are Bunk Beds strong enough for adults?
  • Which citrus fruit is a hybrid?
  • Why is a parallelogram sometimes a rhombus?
  • Who discovered the law of conservation of matter?
  • Are chindi rugs washable?
  • How do you unfreeze a keyhole?
  • What is the best thing to get at Portillos?
  • Does Sprint Unlimited Freedom Plan include roaming?
  • Why does my radiator spit out water?
  • What to do with unwanted children’s books?