Water heaters must be surrounded by a certain amount of clearance, or air space, to function properly and safely. A clearance area of 12 inches is required on all sides of a hot water heater. A certain amount of airflow is also required for proper combustion and ventilation.
Is it OK to enclose a water heater?
In most instances, a home’s water heater is placed in the basement. When the basement is finished so it can be used for another purpose, leaving the water heater in plain view can detract from the appearance of the room. You can enclose the water heater by building a wall around it and constructing a utility closet.
Can a water heater touch the wall? water heater can sit against wall, but this can restrict air flow… so keep stuff away from gas water heater.
How big should a hot water heater closet be?
They require a drain pan 2″ wider than the heater, so for this WH you’d need a closet at least 28″ square, with a door at least 24″ wide.
Does water heater closet need to be vented?
The Vent. When a residential, gas fired water heater is installed in a closet, the heater combustion gases must be vented to the outside of the residence and the fresh air needed for combustion must be drawn in from outside the home using double wall metal pipe; single wall pipe is not permitted.
Does an electric water heater need to be vented?
No. Unlike gas tankless water heaters and gas traditional tank style water heaters, electric tankless water heaters do not require any venting. This is often one of the deciding factors when choosing whether you should purchase a gas or electric tankless water heater.
Can a water heater sit directly on the floor?
Gas water heaters can sit directly on the floor if they are FVIR(flammable vapor ignition-resistant). All gas 30, 40, and 50-gallon water heaters sold to the North American market after 2005 must comply with ANSI Z21. 10.1a-2002 standards and are FVIR. All electric water heaters can be placed directly on the floor.
Where should a water heater be placed in a house?
Generally, the most basic requirements are that water heaters must sit against an external wall because there must be room for the flue. They must also be level for good water and gas flow as well as for safety. Some places also require you to seat the heater at least 18 inches off the floor.
Can a water heater sit on wood?
The tank base can actually be sitting directly on a combustible surface (e.g. carpet or wood etc.).
Is it safe to sleep in a room with a water heater?
It is perfectly safe to sleep in a room with an electric water heater. Gas water heaters should not be placed in a bedroom unless they are direct vent type or separated by a weather-stripped self-close door. The combustion air must always be drawn from the exterior.
Can you put a gas tankless water heater in a closet?
The tankless water heater is small in size. Thus it can be put in small spaces such as under-stair storage areas, closets, in pantries or under the sink. … A tankless water heater is for indoor installation only. In case you install it outside, get a suitable enclosure.
Can electric hot water heater sit on concrete floor?
electric water heater installed on concrete. If the floor is always dry, no worries mate. If it is damp or wet occasionally, then elevating the WH on some bricks or whatever keeps the bottom from rusting. Good.
Can an on demand water heater be installed in a closet?
Your tankless water heater can be installed just about anywhere! Due to the small size of your water heater, it can be mounted in many small spaces, including closets, under sinks, in pantries, or under stair storage areas.
How do you vent a water heater?
Atmospheric gas water heaters vent their exhaust through a vertical or upward sloping metal duct vent to exit the home. This venting may either be dedicated to the water heater or can be shared with other atmospheric vent appliances, such as a furnace. Atmospheric venting works on the principle of hot air rising.
How do you vent a gas water heater through a chimney?
- Install an increaser in the largest hole in the chimney. …
- Install smoke caps in the smaller holes and seal them with furnace cement.
- Install an increaser on the flue base on the water heater. …
- Install the 90-degree elbows on the two increasers, and then rotate the elbows so that they’re aligned with one another.
Can electric water heaters produce carbon monoxide?
Carbon monoxide is produced by devices that burn fuels. Therefore, any fuel-burning appliance in your home is a potential CO source. Electrical heaters and electric water heaters, toasters, etc., do not produce CO under any circumstances.
You May Like Also