What Are Valance Clips?

A valance clip is used to secure the decorative valance to the headrail of the blind. These are typically plastic, but they can be metal, or even magnetic.


How do you replace blind clips? Place a new clip into the grip of the pliers. Place your thumb and pointer finger around the gear to hold it in place. Position the new clip over the gear. Gently push the clip into place by applying a little pressure.

what is a valance clip for blinds?

There's nothing worse than a bare head rail creating an eyesore when you look at blinds. The simple addition of a valance instantly gives your blind a finished look. The valance is a decorative piece of trim that attaches to your headrail with plastic clips.

How do you hang a valance on a wall? Follow the steps below to effectively attach a window valance to a wall bracket. Step 1: Determine Position of Wall Bracket. Step 2: Draw Level Line for Brackets. Step 3: Drill Pilot Holes in Wall. Step 4: Install Drywall Anchors. Step 5: Secure Brackets to Wall. Step 6: Mark Holes on Valance. Step 7: Drill Pilot Holes.

how do you remove valance clips?

To remove the valance, be very gentle. Start by pushing the bottom of the valance towards the window. This will create a gap between the valance and the top of the clips. Then you want to gently push the valance both outwards and upwards until it isn't touching the blind's clips.

What is a valance return? A valance return is the side pieces added to a standard valance. With a standard inside mount blind the valance is cut to fit within the window frame and is one piece of molding. On outside mount blinds this covers the sides of the headrail and the brackets.

how do you replace valance clips on blinds?

If your blind is an inside mount, you will need to remove the blind from the window before you can take off the clip.

How do you attach Venetian blinds to brackets? Whether you've chosen an inside or outside mount, the installation instructions are the same: Align the brackets on either side of the window frame. Using a pencil, mark the screw holes on each bracket. Use your drill to drill a pilot hole. Screw the bracket in place.

What is the difference between a valance and a swag?

A valance is simply a term that represents a top window treatment. A swag is a part of a valance. It's a piece of fabric that's usually pleated or gathered to create a half-circle shape. Some swags can also be flat.

What is a board mounted valance? Simply put, it's a custom valance that hangs from a lumber board rather than from a curtain rod. The board is wrapped in lining or the same fabric as the valance, and then the valance is stapled onto the board. Board-mounted valances can be quite heavy and require sturdy brackets, screws and anchors to stay on a wall.

How do you hang a valance curtain?

Part 3 Putting up the Valance Hang the curtains. Thread the curtain onto the rod and then hang the rod in the brackets. Slide the valance onto its rod. Hold the valance in one hand and slide the rod through it. Put the rod onto the brackets and hang the valance. Use a steamer to smooth out wrinkles on the valance.

How do you put a valance on a Levolor blind?

The easiest way to install Levolor blinds is to secure brackets by drilling 2 screws into the upper inside corners of your window. Then, space your valance clips out evenly onto your headrail. Slide the headrail into the brackets and snap the valance on.

How do you remove blinds with hidden brackets?

Hidden bracket, principle: never pull down to remove. push top headrail in to losen the bottom rear. Then lift rear. if you can't find any visual clue, roll the shades all the way down, use a flathead screwdrive to push up middle of bracket while pulling the headrail away from the window glass.

How do you remove a wooden blind Valance?

Most valances are mounted with a clip that will attach at the top of the headrail. The valance usually can be removed by simply lifting if off the blinds. Next, open the brackets. After the valance is removed you should have access to the headrail of the blinds and the mounting brackets.

Can you put a valance over vertical blinds?

First, measure the window properly for the valance. You can follow it up by installing the brackets to hold up the valance and put up the valance with a few tools. A valance is often hung over vertical blinds of the window to frame the window in an excellent way from the perspective of interiors.