Bar And Chain Oil Alternatives
- Motor oil. Motor oil is the most readily available alternative lube available.
- Vegetable oil. Vegetable oil is also a quite affordable bar and chain oil alternative.
- Canola oil. Canola oil shouldn't be confused with vegetable oil.
- Drained hydraulic fluids.
What happens if you run a chainsaw without bar oil? Without lubricant, the speed at which the chain moves over the chainsaw bar can cause some serious friction. A slowed-down chain and excessive fuel burning mean there's a lot of friction between your bar and chain, which means a lot of heat is being produced that could do major damage to your saw.
can you substitute motor oil for chainsaw bar?Motor Oil. Chain saw bar and chain oil isn't rated by SAE like traditional automobile motor oil. If your manufacturer's bar and chain oil is unavailable, you can use SAE 30 weight motor oil to lube your chain during the summer and SAE 10 weight during the winter, according to the University of Missouri Extension.
Can I use engine oil as chain lube? Using engine oil as a chain lubricant might serve you the purpose. Engine oil could get greasy at lower temperature or might even solidify. Improper lubrication would lead to chain wear, jerky transmission and added friction. Engine oil costs more than the chain lube.
Can I use hydraulic oil for my chainsaw bar? Hydraulic oil should not be used as bar oil. For one, it does not work as well for eliminating pitch on the bar. A quality bar oil will help reduce buildup of pitch on the bar and chain, which helps to reduce wear and increases cutting efficiency.
Can you use regular motor oil on a chainsaw? It is tempting to use what you probably already have on hand rather than buy bar and chain oil for your chainsaw. This leads some to use regular motor oil for the task. The reason is that bar and chain oil has a "high-tack" additive that prevents it from slinging off the chain as it travels around the tip.
What can I use instead of lubricant? According to sex therapist Brier Jirka, some vegetable and mineral oils like avocado, coconut, and olive oil can be used as personal lubricant. They can be great for clitoral stimulation and vulvar massage, or some quality alone time, but keep them far away from your condoms (it could make them break).
Can I use 4 stroke oil in a chainsaw?
Don't use an oil mix in a 4-stroke engine If it is a 2-stroke engine and you forget the oil, you will damage the engine. However, if you have a 4-stroke engine, you should make sure you only use pure gas – otherwise, you will also risk damaging your expensive chainsaw.
Can I use vegetable oil instead of bar oil?
Tips for replacing chain oil with vegetable oil: Use canola oil – Canola oil is currently the most common environmentally compatible chain-and-bar lubricant. Vegetable oil is thinner – Vegetable oils have lower viscosities than the bar/chain lubricants and therefore flow more readily.
How tight should a chainsaw chain be?
A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can't pull the drive links out of the bar nose.
Can I use 2 stroke oil as bar oil?
Always use 2 stroke oil only for the mix. Oil is "relatively" cheap, compared to small engines. It is not worth the loss of lubrication and deposit control risk. Bar oil needs to be sticky in the summer for lubrication and to flow with "stickyness" for bar and chain lube in the cold.
What weight is bar and chain oil?
For this reason, bar and chain oil should suit most loggers. They usually have a 10W relative weight during winter and 30W during warm weather conditions. You can check most oils authenticity by putting on the chainsaw and looking for any oil spills at about 8 inches on the other side.
Can I use 10w30 for chainsaw bar oil?
Always use proper protective gear! The oil can be messy and oil on the lawn will kill the grass. Whenever I've used stray old bottles of automotive 10w30 as bar-chain oil, it just gave the impression that it wasn't as good. Not ideal, but works in a pinch.
What is bar and chain oil made of?
Rapeseed-based (usually called canola) oil is currently the most common environmentally compatible chain-and-bar lubricant. Vegetable-based oils are triglycerides or natural esters that come from agricultural crops.
You May Like Also